The process for producing Precast Wall Panels with EnviroCrete Mix requires an industrial precast manufacturing plant with specialised equipment for batching casting and conveying on flat beds; overhead cranes are needed for lifting the panels vertically; and, external gantry cranes are needed for lifting the panels onto the transport trucks; also, storage facilities are needed for managing the storage and curing of the panels.

The manufacturing process for precast wall panels, begins with:
1. The receipt of the EnviroCrete Raw from the treatment factory.
2. The wood aggregate is then fed to a special batching plant and mixed with cement and water to form EnviroCrete Mix.
3. Thereafter it is conveyed to the casting bed by means of a special skip-bucket.
4. The EnviroCrete Mix is casted on an array of beds equipped with pre-set shuttering.
5. Once casted, the panels are in a horizontal position and levelled uniformly with a vibration and compacting system;
6. thereafter the panels are covered and left to cure for about 10 hours on the beds.
7. Finally, the panels are tilted to a vertical position, lifted and removed by an overhead crane to the temporary curing stockyards/storage facilities.

EnviroCrete products can be delivered to site after 10-20 days and on site erecting of the building/structure can start immediately according to the EnviroCrete Construction System.